• 3 minutes e-car sales collapse
  • 6 minutes America Is Exceptional in Its Political Divide
  • 11 minutes Perovskites, a ‘dirt cheap’ alternative to silicon, just got a lot more efficient
  • 17 mins GREEN NEW DEAL = BLIZZARD OF LIES
  • 6 days If hydrogen is the answer, you're asking the wrong question
  • 6 hours How Far Have We Really Gotten With Alternative Energy
  • 10 days Biden's $2 trillion Plan for Insfrastructure and Jobs
Brian Westenhaus

Brian Westenhaus

Brian is the editor of the popular energy technology site New Energy and Fuel. The site’s mission is to inform, stimulate, amuse and abuse the…

More Info

Premium Content

Engineers Reveal Flow Battery Cell Breakthrough

  • Georgia Tech engineers have unveiled a breakthrough flow battery cell configuration that could have huge implications. 
  • The new development will reduce the size and cost of entire flow batteries.
  • This tech is sure to get lots better, and with this research showing a huge improvement, likely another wave of effort could come quickly.
Battery

Georgia Institute of Technology engineers have now developed a more compact flow battery cell configuration that reduces the size of the cell by 75%. That corresponds to reducing the size and cost of the entire flow battery. The work could revolutionize how everything from major commercial buildings to residential homes are battery powered.

The all-Georgia Tech research team published their findings in the paper, “A Sub-Millimeter Bundled Microtubular Flow Battery Cell With Ultra-high Volumetric Power Density,” in Proceedings of the National Academy of Sciences.

Flow batteries offer a solution. Electrolytes flow through electrochemical cells from storage tanks in this type of rechargeable battery. The existing flow battery technologies cost more than $200/kilowatt hour and are too expensive for practical application.

The Georgia Tech work could revolutionize how everything from major commercial buildings to residential homes are powered.

Solar and wind power are inconsistent at producing enough energy for a reliable power grid. Alternatively, lithium-ion batteries can store energy but are a limited resource.

Nian Liu, an assistant professor at the Georgia Institute of Technology offered, “The advantage of a coal power plant is it’s very steady. If the power source fluctuates like it does with clean energy, it makes it more difficult to manage, so how can we use an energy storage device or system to smooth out these fluctuations?”

Flow batteries offer a solution. Electrolytes flow through electrochemical cells from storage tanks in this rechargeable battery. The existing flow battery technologies cost more than $200/kilowatt hour and are too expensive for practical application, but Liu’s lab in the School of Chemical and Biomolecular Engineering (ChBE) developed a more compact flow battery cell configuration that reduces the size of the cell by 75%, and correspondingly reduces the size and cost of the entire flow battery.

Finding the Flow

Flow batteries get their name from the flow cell where electron exchange happens. Their conventional design, the planar cell, requires bulky flow distributors and gaskets, increasing size and cost but decreasing overall performance. The cell itself is also expensive. To reduce footprint and cost, the researchers focused on improving the flow cell’s volumetric power density (W/L-of-cell).

They turned to a configuration commonly used in chemical separation – sub-millimeter, bundled microtubular (SBMT) membrane – made of a fiber-shaped filter membrane known as a hollow fiber. This innovation has a space-saving design that can mitigate pressure across the membranes that ions pass through without needing additional support infrastructure.

Ryan Lively, a professor in ChBE said, “We were interested in the effect of the battery separator geometry on the performance of flow batteries. We were aware of the advantages that hollow fibers imparted on separation membranes and set out to realize those same advantages in the battery field.”

Applying this concept, the researchers developed an SMBT that reduces membrane-to-membrane distance by almost 100 times. The microtubular membrane in the design works as an electrolyte distributor at the same time without the need for large supporting materials. The bundled microtubes create a shorter distance between electrodes and membranes, increasing the volumetric power density. This bundling design is the key discovery for maximizing flow batteries’ potential.

Powering the Battery

To validate their new battery configuration, the researchers used four different chemistries: vanadium, zinc-bromide, quinone-bromide, and zinc-iodide. Although all chemistries are functional, two were most promising. Vanadium was the most mature chemistry, but also less accessible, and the reduced form of it is unstable in air. They found zinc iodide was the most energy-dense option, making it the most effective for residential units. Zinc-iodide offered many advantages even compared to lithium: It has less of a supply chain issue and also can be turned into zinc oxide and dissolve in acid, making it much easier to recycle.

This electrochemical solution for this unique shape of the flow battery proved more powerful than conventional planar cells.

Xing Xie, an assistant professor in the School of Civil and Environmental Engineering noted, “The superior performance of the SMBT was also demonstrated by finite element analysis. This simulation method will also be applied in our future study for cell performance optimization and scaling up.”

With zinc-iodide chemistry, the battery could run for more than 220 hours, or to > 2,500 cycles at off-peak conditions. It could also potentially reduce the cost from $800 to less than $200 per kilowatt hour by using recycled electrolyte.

Building the Future of Energy

The researchers are already working on commercialization, focusing on developing batteries with different chemistries like vanadium and scaling up their size. Scaling will require coming up with an automated process to manufacture a hollow fiber module, which now is done manually, fiber by fiber. They eventually hope to deploy the battery in Georgia Tech’s 1.4-megawatt microgrid in Tech Square, a project that tests microgrid integration into the power grid and offers living laboratory for professors and students.

The SBMT cells could also be applied to different energy storage systems like electrolysis and fuel cells. The technology could even be strengthened with advanced materials and different chemistry in various applications.

“This innovation is very application driven,” Liu said. “We have the need to reach carbon neutrality by increasing the percentage of renewable energy in our energy generation, and right now, it’s less than 15% in the U.S. Our research could change this.”

ADVERTISEMENT

***

Cutting the battery volume by 75% is a huge improvement. As the press release noted the capacity and charge/discharge lifetime is tremendous. That plus the steer around lithium has lots of battery watchers quite enthralled.

The issues focused on building the battery, Hand layout, even for the lab test unit, had to be immensely tedious. That and the volume of fiber needed if the market responds is going to a big process engineering project. Maybe some sharp engineer will use a laser to just punch holes in a sheet of the fiber material and save the layout step entirely. There will be lots of ideas to come.

But this is just at the proving testing stage. This tech is sure to get lots better, and with this research showing a huge improvement, likely another wave of effort could come quickly.

More than 2500 cycles with first design. Wow.

By Brian Westenhaus via New Energy and Fuel

More Top Reads From Oilprice.com:


Download The Free Oilprice App Today

Back to homepage





Leave a comment

Leave a comment




EXXON Mobil -0.35
Open57.81 Trading Vol.6.96M Previous Vol.241.7B
BUY 57.15
Sell 57.00
Oilprice - The No. 1 Source for Oil & Energy News